Garden Professional Grafting Cutting Tool

Features:

Rootstock and scion it is easy to match the U-cut,V-cut or Ω-cut,rapid healing

Using easily and fastly. Grafting method than the traditional savings

The time and effort Blade can be replaced

Use the pruner to cut useless branches from the plant

Style A:2 Blades Professional Garden Fruit Tree Pruning Shear Grafting Cutting Tool (BLACK)

This product is a semi-automatic grafting machine with high production efficiency and high success rate of grafting. Due to its simple structure and easy operation, it has a large number of applications at home and abroad.

It is suitable for semi-mechanized operation of melon seedlings such as fruit branches, watermelons and cucumbers.

The traditional use of a small knife to cut the slope, the two branches to be cut into the same slope, it is more laborious. With this kind of machine, it is very convenient to press out the matching interface, which is highly efficient.

First, improve the grafting speed, simple operation, fast cutting speed, it can greatly improve the grafting speed.

Second, the survival rate is high, the speed is fast, the cutting surface is smooth and flat, the interface between the scion and the rootstock is tight, and there is no gap in theory, so that the wound is easy to heal and the survival rate is improved.

Third, reduce production costs, because the grafting speed is fast, the survival rate is high, and the gardening speed is fast. The use of the grafting machine can effectively reduce the production cost and improve the competitiveness of the product.

Its characteristics are:

1. It is easy to cut the rootstock and scion into an anastomosed U-shaped, V-shaped or omega-type, which heals quickly;

2, easy to use and fast. Save time and effort over traditional grafting methods;

3, the blade can be replaced; equipped with 3 kinds of blades, suitable for grafting of various plants

4. You can use a grafting knife to trim unwanted branches;

5, the blade has a blade at both ends, a piece of top 2

How to use: Soft branches can also be grafted. Suitable for diameters 4-12 mm

Specification:

For the knife

Materials : carbon steel, ABS and Aluminum

Color black

Cut grafting stocks from 5mm up to 1.4cm diameter

Trimming blades 3mm thick

Phillips screwdriver with red handle

Size 27*10 cm/10.5*3.9inch

(1cm=0.39Inches)

A wrench

2 additional blades

A black bag

How to use: 

Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.

Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.

Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.

Step 4: Use the pruner to cut useless branches from the plant.

Step 5: The grafting tool with “V & U & Ω” blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.

Details 

How to use it 

Manual